 Gain
Structure - 8 - Setting the gain-6 |
||
The Mixer with Groups If you are using a mixer with groups (such as the Soundcraft K3 which has 8 groups), then you will need to make sure that the mix buss is not overloaded. The mix buss is a term used to describe the signal path or channel where multiple signals flow. This is particularly the case where you are routing signals to the groups and then to the main L&R outputs. If the groups are being used simply as outputs for multiple zones, then each group output is treated as in the example as if it were the main output described. If you are routing to groups and thence to the main output, set the level at the groups first using your test signal, and then use these to set your master faders. Again, in usual operation, all faders should be at or around the '0' or unity mark. Remember also that some input devices have gain settings. For example, some microphones such as the AKG C535EB have a 'pad' which can be used if the original signal is too loud and is producing a distorted signal in the mic even before it reaches the mixer. Also, Radio mic systems have gain settings on the transmitter and receiver, and these must be set first before setting the mixer gain. See the 'How To...' guide on setting up radio mics for more info on this. |
||
|
mm productions
sound design & equipment hire
